VMS VMS.PR04 No-Peel Primer No. 4 Panzer grey 100 ml

Sticks to everything!

Suited to prime plastic, metal, resin and 3D printed parts to give your paints an adhesion and durability boost. Paint applied over VMS primer won’t scuff easily even if there is a lot of handling involved. Product doesn’t flood details which will remain crispy thanks to the small particle size binder used. Self-levelling.

User-friendly

No aggressive solvents content means VMS No-Peel primer can be applied over styrofoam and other delicate materials. Noxious fumes are no concern and you can clean your tools with tap water conserving airbrush cleaner.

Made for speed

Paint can be applied after just 2h of natural drying or as soon after 30 minutes following force-drying. Comes in a handy 100 ml dropper bottle. Working PSI: 20-40. Recommended nozzle sizes 0.2, 0.3, 0.4.

Easy to spray

Thinned for airbrushing, viscosity is set at only 40 cSt. (measured according to German DIN 53 211 standard). Work like a pro with maximum control, using a 0.2 nozzle! You can readily pre-shade using VMS black and white primers, conserving your paints.

VMS No-Peel primer is a high performance primer combining adhesion and durability levels of solvent-based primers and working ease of water-based products. Simply put, an odourless, sure-fire primer that will adhere to any surface and not peel away like generic acrylic and acrylic polyurethane primers. Suited to prime plastic, metal, resin and 3D printed parts to give your paints an adhesion and durability boost.

​

Thinned for airbrushing and self leveling, with viscosity of only 40 cSt. (DIN 53 211) allowing you to use a 0.2 nozzle for maximum control. You can readily pre-shade using VMS black and white primers, conserving your paints. Product doesn’t flood details which will remain crispy thanks to the small particle size binder used.

​

No aggressive solvents content means VMS No-Peel primer can be applied over styrofoam and other delicate materials and as an added bonus there will be no noxious fumes in your workplace. Tools can be cleaned with tap water conserving airbrush cleaner. Paint can be applied after just 2 h of natural drying or as soon after 30 minutes following force-drying. Comes in a handy 100 ml dropper bottle. Working PSI: 20-40. Recommended nozzle sizes 0.2, 0.3, 0.4.

IMPORTANT: The acrylic product is susceptible to low temperatures and mustn't be frozen! Store and handle in room temperature.